The Necessity of Daily Cleaning of Charcoal Machine Equipment

Almost every carbonization machine of the mechanism charcoal machine will have a small amount of ash residue on the bottom and top of the carbonization furnace. Most of the sources of these ash components are ash impurities on the surface of the semi-finished salary bar, but the same is not excluded. The ash impurities in the environment are mixed in, and the ash components remaining in the carbonization furnace of the mechanism charcoal machine will seriously affect the carbonization quality of the secondary operation of the mechanism charcoal machine. The ash component remaining in the carbonization furnace is not removed during the secondary carbonization of the mechanical charcoal machine. Once the temperature of the carbonization furnace rises to about 300 degrees, the ash components on the top and bottom of the carbonization are affected by the high temperature of carbonization. The falling ash component will also adhere to the surface of the semi-finished salary bar that is being volatilized by high temperature carbonization, and finally the mechanical carbon product will be produced under this environment. The surface will be very low after the surface is affected by the ash component, and the quality will only be low. Can be regarded as a poor quality mechanism of carbon products. Therefore, if the furnace is not cleaned after each carbonization, it is easy to affect the quality of the next production product. It can be seen that daily cleaning of the charcoal machine equipment is very important and necessary.