Conventional operation method of carbonization furnace

Before using the carbonization furnace, check whether the fan is rotating flexibly and smoothly; whether the condenser has water leakage; whether the joints of the components are tight, and whether the seal rock of the furnace door or the fire door is sufficient.

Then put the salary bar into the furnace, it should be noted that the salary bar must be evenly laid flat, close the furnace door after filling, ignite the fuel in the ignition furnace, start the induced draft fan, close the upper fire door, open the lower fire door, adjust The valve at the outlet makes the flue remain unobstructed, and smoke is emitted and the pilot is removed.

Next, timely control of the temperature, this requires a certain production experience, and finally carbonization is completed, the furnace temperature can be lowered to 100 °C before the furnace door can be opened, water is prepared in advance, and if there is charcoal with Mars It is immersed in water, which is the operation method of the carbonization furnace.