How to reduce flue gas emissions during the production of charcoal machines

How to reduce flue gas emissions during the production of charcoal machine? In the charcoal machine equipment, the generation of smoke is inevitable, but the excessive emission of flue gas will have a certain impact on our environment, so we need Take certain measures to control the amount of smoke emitted during the carbon making process. We have thought of three feasible methods for your reference.

The first method is the condensation recovery method. This is a relatively high investment cost method, which requires the use of a condensation tower and a separation tank. Through the work of these two kinds of equipment, the wood tar and wood vinegar in the flue gas can be recovered. However, the high investment cost makes it difficult to get a wide range of promotion and use.

The second method is the water immersion method. The so-called water immersion method is to let the flue gas precipitate through the pool. This requires the user to build a pool next to the charcoal machine equipment, and introduce the flue gas inside the carbonization furnace into the pool through the fan and the pipeline, and then pass the specific heat. The wood tar and wood vinegar in the flue gas are condensed and precipitated. It should be noted that the wood tar and wood vinegar deposited at the bottom of the tank need to be cleaned regularly.

The third method is the series connection of chimneys and centralized discharge method. This is a very simple method of introducing the flue gas from the charcoal furnace into the concentrated chimney through the public flue and then discharging it at high altitude. Although this method can not reduce the emission of flue gas, it can still reduce the influence of flue gas on the surrounding environment because it increases the emission height of flue gas. This is the method adopted by most charcoal machine manufacturers.

Although the above three methods of controlling flue gas emissions require additional investment, which may exceed our budget, we minimize the emissions of flue gas generated during the production of charcoal machines for the environment we live in.