What is the difference between toner molding machine and rod making machine

The toner molding machine and the stick making machine are both the equipment in the charcoal machine equipment, which are both producing charcoal. What is the difference between the toner forming machine and the stick making machine? What's the difference?

The carbon powder molding machine is the carbon after the raw materials are carbonized, and then pulverized, and then directly use the molding machine, the carbon block pressed by the carbon powder molding machine is the finished carbon. The production of the rod making machine needs to pulverize the raw materials, and then dry the pulverized raw materials. After drying, the rods are made by the rod making mechanism. The final product is after carbonization.

The toner molding machine and the rod making machine are all formed by pressing raw materials, one is pressing the finished product, and one is pressing the semi-finished product. The most commonly used are stick making machines. The stick making process of the stick making machine uses more raw materials than carbon powder forming machines, such as straw and straw. These can be pulverized first, then dried, and made into stick Powder molding machines cannot be used.

However, many investors will ask if it is unnecessary to buy a toner molding machine, and tell investors that it is also necessary to purchase a toner molding machine. The carbonization molding machine can make carbonization unqualified and produce Crush the carbon, make a reasonable secondary use, and press them to make a toner stick. If there is no toner molding machine, substandard carbon and broken carbon will be wasted, causing losses to the enterprise.