Later maintenance of rod making equipment

rod making equipment

Regular inspection method of rod making equipment: The method of regular inspection of rod making machine is revealed:

①. Dust shot down on the bar sweeper equipment should also be dedusted during the demolition process, and the dust should not be allowed to invade the moving parts during the demolition inspection

②. Open the internal cleaning inspection, and check the wear of the bearings, spirals, triangle liners, nozzles and other parts, and replace the bearing grease

③. Remove the bearing cover of the roller shaft and check the bearing wear

④. Remove the visual cover of the reducer and check the gear wear and tooth engagement

⑤. Check whether the foundation bolts and safety bolts are loosened and tightened.

Use and inspection of lubricants for rod making equipment:

①. The gear oil in the open gear box should invade the gear more than 60 mm

②. The roller bearing is opened every three months. The bearing is replaced to replace the grease or grease gun.

③. The gearbox oil is added to the reducer, and the amount of intrusion into the gear is 60 mm. Effective daily maintenance and repair can prolong the service life of the equipment, minimize the production shutdown due to parking, and effectively ensure the continuous work of the equipment. .