What kind of problems in the rod making machine need to be overhauled

What kind of problem does the stick making machine need to be overhauled? This problem is a problem for many investors in the charcoal machine industry? The stick making machine is the most important equipment in the charcoal machine equipment, and it is the production of semi-finished machined carbon. If there is a problem with the equipment, production cannot be carried out, and if there is no way to produce it, it cannot bring good benefits to the enterprise. What problems with the rod making machine need to be overhauled? Let me talk about it for you.

Charcoal Machine

1. During the process of the rod making machine, if there is smoke, how to perform maintenance? If this situation is encountered, it is necessary to check with the machine to see if the raw material is too humid, if the humidity is too high, then The humidity of the raw materials must reach 8% to 12%. If it is not a humidity problem, check whether the end face of the recommender is worn. If the end face is worn, smoke will also appear. If the propeller is worn, it is necessary Repair it.

2. During the process of the rod making machine, the rods produced did not form. If there is a problem of non-forming, check the heating ring of the rod making machine, and check whether the heating ring can be heated. If it cannot be heated, it is necessary to replace the heating ring before working.

3. If there is a shutdown during production, how to perform maintenance? This depends on whether there is a problem with the circuit. If there is a problem with the circuit, repair it in time.