charcoal making machine price

The charcoal machine is used to produce charcoal rods with high density, smooth surface and no obvious cracks, so as to ensure that a good machine-made charcoal can be made. In the production process of using the charcoal machine, we can choose the appropriate molding temperature according to the type of raw material and the moisture content. Its height can only be determined after field tests. Generally speaking, the screw propeller is good, and the moisture content of the raw material is between 6-12%, then we can control the molding temperature of wood chips, wood sawdust, wood shavings and bamboo raw materials between 260-320℃.

Charcoal Machine

The drying of the raw materials of the charcoal machine is the guarantee of the quality of the charcoal produced by the production mechanism. Only good raw materials can make charcoal rods. In addition to the quality of the stick depends on the charcoal machine equipment and process, it also depends on the amount of moisture in the raw material. Generally, the moisture content of raw materials is required to be less than 12%, but also greater than 6%. Therefore, our first step is to dry the raw materials.

Raw material rod making is done in a forming machine (or rod making machine). There are three heating rings outside the molding cylinder of the molding machine, which can increase the temperature of the molding cylinder to about 350°C.

Raw materials, molding, carbonization, finished products to analyze the relationship between carbon and temperature. The whole process of burning charcoal deals with heat. The amount of heat can be measured by a specific "temperature".