Machine-made charcoal machine production process requires equipment

Machine-made charcoal machine production process requires equipment and production process. A complete machine-made charcoal machine production process requires a lot of equipment. Only by matching these equipment reasonably can the process of making charcoal from waste crops such as wood chips and straw can be realized. It is a complete set of mechanism charcoal machine technology.

Charcoal Machine

We know that the drying process is more important in the entire charcoal process. The role of the choice of fan in the drying process is beyond doubt. A well-chosen fan can achieve stable airflow drying. It plays an important role in the whole mechanism of charcoal process. So, how to reasonably configure the fan of the mechanism charcoal machine equipment.

First of all, we must choose a suitable fan. If you want to choose a suitable fan, you must determine the mass flow and total pressure head of the fan according to the production capacity and resistance of the machine-made charcoal machine system. For a single induced draft fan system, ensure that the total pressure of the fan is greater than the system resistance. In the case of a double-blower-induced-draft fan system, the total pressure of the two fans should be greater than the resistance of the system.

The second is based on actual production needs. Determine the range of air volume changes, and then determine the fan renovation plan.

Third, in the process of using the fan, pay attention to the changes in the air temperature at the fan, especially when the actual temperature is lower than the design temperature, the motor may be overloaded, and the motor may be burned in severe cases.

Reasonable configuration of the fan of the machine-made charcoal machine equipment is of great help to the whole machine-made charcoal process. Reasonable selection of fans, generally according to the fan curve to determine which type of fan can well meet the operating conditions required by the drying system, so that the fan production efficiency is higher.