How to judge whether the charcoal produced by the mechanism charcoal machine is unqualified

In the market, the machine-made charcoal machine is a very good equipment. If the customer purchases the equipment, various problems may arise. For example, unqualified charcoal will be produced. If the quality of the machine-made charcoal machine is satisfactory, the reasons may be the following:

charcoal machine
 

1. Semi-finished fuel rods: The density should be high. This link should focus on the quality of the semi-finished fuel rods made by the rod making machine. Of course, the higher the density, the better the charcoal will be carbonized.

2. The planning of machine-made kilns should be reasonable and the sealing should be strong. Air leakage will result in the formation of raw charcoal and the kiln does not extinguish the fire, even if the carbonization furnace is used, the welding seam around the furnace must be sealed.

3. The carbonization process cannot be too fast, so ensure a good carbonization curve and achieve moisture drainage.

4. According to customer requirements, we can use our own carbonization principle to produce qualified high, medium and low temperature carbon. And can make a clear judgment on the carbonization curve, the color and taste of the smoke, whether the charcoal is qualified, because the result of the carbonization is a guarantee of profit.

It is far from enough to ensure quality by someone’s strength. We need to work together! Initiate the concept of creating qualified products in production! We must do our best to improve the nature of skills. The bar-making process of the energy-saving mechanism charcoal machine requires high moisture content of the material, and the moisture content of the material is generally between 5%-12%. If the moisture content is less than 5%, the material conversion and degree are poor, the rod will not be strong; if the moisture content is >12%, the rod will be soft and easy to bend, and the density will be low.

Generally, fresh materials (such as fresh bamboo, raw branches, etc.) have a water content of about 50% and need to be dried 1-2 times with a dryer in an energy-saving mechanism charcoal machine. If the material is dried in the open air or in the sun for 1-2 days, the number of drying times can be reduced by one. No matter what, we have to dry the material more than once to meet the requirements of making rods.

How to distinguish the wetness and dryness of the materials used in the energy-saving mechanism charcoal machine?

Generally speaking, we can make a rough distinction after seeing and feeling. As long as we have accumulated experience, this method is still feasible. In the first row, let’s touch the shell of the separator under operation, its temperature makes the hand feel hot; secondly, we can see the color of the material that has just come out, it is required to turn yellow; grab a handful of the material that has just come down, and rub it into a ball with the palm of the hand. , And then spread out fiercely, requiring all materials to be scattered.

If the materials processed by the machine-made charcoal machine manufacturers meet the above requirements together, it can be deemed that the materials meet the requirements. Of course, the inspection by the rod making machine will prevail. If the propeller is normal and the produced fuel rods meet the product quality requirements, the moisture content is just at the normal scale.