Post-maintenance of rod making machine equipment

Regular inspection method of rod making machine equipment: The method of regular inspection of rod making machine is revealed:

Charcoal-Product-Line

①. To sweep down the dust on the rod machine equipment, attention should be paid to dust removal during the demolition process, and dust should not invade the moving parts during the demolition inspection.

②. Open the internal cleaning inspection, and check the wear of the bearings, spirals, triangular liners, nozzles and other parts, and replace the bearing grease

③. Remove the bearing cap of the roller shaft and check the wear of the bearing

④. Remove the visual cover of the reducer to check the wear and gearing state of the gear

⑤. Check the foundation bolts and whether the safety bolts are loose and tightened.

Use and inspection of lubricants for rod making machine equipment:

①. The gear oil in the open gearbox should penetrate the gears for more than 60 mm

②. The roller bearing is opened every three months to replace the grease or grease gun and refuel

③. Add gear oil to the reducer, and the filling amount can invade the gear 60 mm. Effective daily maintenance and overhaul can extend the service life of the equipment, can minimize the production shutdown due to parking, and can effectively ensure the continuous operation of the equipment .