A complete set of charcoal machine equipment and equipment prices

The charcoal machine is also called the briquetting machine. It is a new type of charcoal burning equipment improved on the basis of the original burning charcoal. The applicable raw materials of the charcoal machine are very wide, breaking the original fixed raw materials. The sawdust, corner waste, corn stalks, rice husks, cotton stalks, branches, etc. in the wood factory where the source of raw materials has been abandoned for a long time are rod-shaped and pressed by high-temperature extrusion of the rod-making machine. So what equipment do you need to produce charcoal?

1; a rod making machine. (Type 50 or Type 80) Of course, if the daily output demand is large, the equipment can be increased in turn.

2; a pulverizer. (If the raw materials are all sawdust, you don't need a pulverizer.) If it is wood scraps or branches, you need a pulverizer. Because the raw material of the rod making machine is 5-8 cm.

3; a dryer. The rod making machine also has requirements on the dryness and wetness of the raw materials. The moisture content of the raw material cannot exceed 12%. Too wet or too dry can not make a good carbon rod.

4; a carbonization furnace. The carbonization furnace is the last process. Because the mechanical charcoal pressed by the rod making machine is a raw carbon rod, at this time, a carbonization furnace is needed to carbonize the mature rod, and such a charcoal rod can be used for barbecue, heating, etc. Conversely, it can also be used for firing boilers, etc.