The principle of making charcoal with charcoal machine

The charcoal machine is a machine that pulverizes bamboo sawdust, peanut shells, corn cobs and other raw materials into granules within 10mm by a sawdust pulverizer, which is dried in a dryer and then put into a carbonization furnace for carbonization. The complete set of equipment for the charcoal machine includes: Crusher, dryer, rod making machine, carbonization furnace, conveyor, etc. Charcoal made from charcoal machine is a waste renewable energy fuel, smokeless, non-toxic, clean and hygienic, and can be widely used in the fields of home heating and barbecue food; in industry, it can also replace coal or heavy oil burning steam boilers, and can also be used as chemical raw materials for deep processing Activated carbon, silicon carbide, crystalline silicon and other materials; agriculture can also be used to increase ground temperature, improve soil, etc.

Second, what is the working principle of the charcoal charcoal machine

The charcoal machine charcoal uses some wastes, such as branches, straws, straws, peanut shells, tree trunks, cotton straws, tea seed shells, fruit shells, weeds, leaves, etc. These substances contain biomass fibers that can produce charcoal. These raw materials It is pulverized into powder below 10mm by a pulverizer, and then dried by a dryer to remove 88% of the moisture. It is put into a briquette machine for high temperature and high pressure molding, and then placed in a carbonization furnace for carbonization. Finally, the finished machine charcoal is transported through a conveyor.

This picture is provided by registered user "Internet Talk", copyright notice feedback

3. How much is a charcoal machine

The price of the charcoal machine should be calculated for the price of the complete set of equipment, including the pulverizer, the dryer, the rod making machine, the carbonization furnace, and the conveyor:

1. The price of the pulverizer is relatively low. Usually, the pulverizers equipped on the charcoal machine are small pulverizers, usually about five or six thousand dollars. The size of the raw material to choose.

2. The rod making machine is an indispensable core component of the charcoal machine, so this aspect cannot be saved. The price of the rod making machine ranges from 12,000 to 20,000.

3. The dryer equipped with the small charcoal machine is generally an air flow dryer, and the price is similar to that of the briquette machine. The selection should be based on the quality and price of the machine.

4. The carbonization furnace has high efficiency. The distillation carbonization method is adopted, which can collect the wood gas and wood tar generated in the carbonization process and return it to the furnace for combustion, reducing the carbonization flue gas. Due to the high production cost of the carbonization furnace, the market quotations are also relatively high. Chaos, ranging from 20,000 to 30,000 to hundreds of thousands, the specific price should be determined according to the performance and product quality.

5. The conveyor is the equipment that connects the machine for conveying raw materials and finished charcoal. Rubber conveying or screw conveying can be used. The price of the conveyor is generally not expensive, about seven or eight hundred yuan per meter.

To sum up, the price of a complete set of charcoal machine equipment is about 50,000 to 80,000 yuan. If you buy a complete set of equipment, you will generally get a discount on the basic equipment quotation, which is cheaper than buying it alone.