New environmental protection carbonization furnace

The new environmentally friendly carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can be dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas, which can be used for heating, cooking, and drying machines. use.

At present, there are three types of carbonization furnaces, ordinary type (can only be used to produce charcoal, can not collect gas); wood carbonization equipment (used to carbonize branches, wood blocks, coconut shell blocks, scraps in furniture factories, etc. The equipment can be configured The recovered gas from the gasification furnace device can be turned into gas for the carbonization furnace’s own use or others); the new environmentally friendly carbonization furnace has the function of one machine and two uses, and the material can also be carbonized directly, or it can be made into rods first

After carbonization.

1. According to the furnace, there are three cubic, five cubic and ten cubic furnaces, the raw material carbon yield is over 40-60%, and the finished product rate is over 95%;

2. Save labor and time, one person can operate several carbonization furnaces at the same time;

3. Wood carbonization This equipment also has a gasifier device, and the self-produced gas can be used or recycled.

Features

1. The carbonization furnace adopts a horizontal manufacturing process. The carbonization furnace has a three-component structure, and there is a light insulation material in the middle of the interlayer, which can always keep the temperature in the furnace from dissipating;

2. The furnace door is sealed with boiler packing, no air will enter, and the carbonization rate is much higher than that of conventional carbonization furnaces;

3. The reason why it is called an environmentally friendly carbonization furnace is because the wooden stick will produce a lot of light yellow combustible gas during the carbonization process. These gases can be diverted to the combustion area of the carbonization furnace through the pipelines of the carbonization furnace itself for secondary fire heating , more environmentally friendly and fuel-efficient;

4. The excess gas from the carbonization furnace can be used to dry sawdust or to burn boilers;

5. The carbonization furnace has a shorter cooling time at the end of charcoal burning, and it is faster and more convenient to use the gap in the middle of the interlayer to cool the carbonization furnace with water to cool down naturally;

6. The environmental protection air flow carbonization furnace is equipped with rails and kiln cars, which is more convenient to use and reduces the labor intensity of workers.

Customers purchase this kind of carbonization furnace to achieve simple operation, low labor intensity, convenient charging and discharging of carbon, greatly reduced cooling time, and greatly increased output of carbonization furnace.

The new carbonization furnace highlights 2 advantages:

①Environmental protection: all the precipitated gas is utilized, the combustion waste gas can reach the standard discharge, and there is no ammonia-containing cooling wastewater discharge.

②Carbonization time: The carbonization time is only within 4 hours, and the carbonization time is short.