Which kind of raw material is better for machine-made charcoal

Where should the machine-made charcoal machine be checked during installation? The machine-made charcoal machine manufacturer reminds you. The charcoal machine may loosen parts during transportation. If the charcoal machine will damage the equipment during the production process, if the user installs it by himself, the equipment should be carefully checked according to the installation instructions before production.

There are many raw materials for making charcoal by the charcoal machine. In theory, as long as it is a material containing carbon elements, there are many particularities about which material is more suitable for making charcoal.

machine-made charcoal

Charcoal raw materials: sawdust, rice husk, melon skin, coconut shell, medicine residue, bamboo, walnut skin, branches, tree bark, tree trunk, wine residue, vinegar residue, furfural residue, peanut shell, various crop straws or hard weeds, nuts Shell and so on.

So which kind of raw material is better for machine-made charcoal? The answer is: sawdust. Because the carbon content of sawdust is higher than that of ordinary raw materials, the water content and density of the raw materials are also relatively large.

So the charcoal made is better. The quality of charcoal made from other raw materials is not inferior. The basic quality is similar. Don't pursue all the machine-made charcoal made with sawdust too much. Therefore, the manufacturer recommends that while using sawdust to make charcoal, it is recommended to add some other raw materials for mixed production.

However, I would like to remind customers that straws, rice husks, leaves, etc. are relatively undesirable raw materials, because the charcoal production rate is very low, and the quality of the charcoal produced is not good. It is recommended not to use these raw materials.