What are the factors related to the charcoal rate of machine-made charcoal machine equipment

What are the factors related to the charcoal yield of machine-made charcoal machines? Friends who have known machine-made charcoal machines may know that the quality of finished products made from different raw materials is not the same. In fact, the charcoal yield of machine-made charcoal machines is due to There will also be certain differences in different types of raw materials. The wood fiber content in the raw material has a positive effect on the output of charcoal. Generally, wood fiber with high density can produce dense and strong machine-made charcoal, and vice versa.

charcoal rate of machine-made charcoal machine equipment

At the same time, the level of carbonization temperature also has a certain impact on the rate of finished charcoal. The finished charcoal produced by lower carbonization temperature is of low quality and corrosive, contains acidic tar substances, and cannot be burned with a clean smokeless flame. The solid carbon content of high-quality commercial carbon should be higher than 80%, which requires us to control the final carbonization temperature above 500°C. However, as the carbonization temperature increases, the fragility of charcoal will increase. In actual production, it has been found that when the final carbonization temperature is between 550°C and 650°C, the brittleness of machine-made charcoal and solid carbon An ideal balance can be reached between the contents.